dmesg - Intel Core i7-6700K - ASUS NVIDIA GeForce GTX 1070
microcode: microcode updated early to revision 0xc2, date = 2017-11-16
Linux version 4.14.14-1-MANJARO (builduser@manjaro) (gcc version 7.2.1 20171224 (GCC)) #1 SMP PREEMPT Wed Jan 17 22:34:54 UTC 2018
x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
x86/fpu: xstate_offset[3]: 832, xstate_sizes[3]: 64
x86/fpu: xstate_offset[4]: 896, xstate_sizes[4]: 64
x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes, using 'compacted' format.
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
BIOS-e820: [mem 0x0000000000059000-0x000000000009efff] usable
BIOS-e820: [mem 0x000000000009f000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x000000009fc67fff] usable
BIOS-e820: [mem 0x000000009fc68000-0x000000009fc68fff] ACPI NVS
BIOS-e820: [mem 0x000000009fc69000-0x000000009fc69fff] reserved
BIOS-e820: [mem 0x000000009fc6a000-0x00000000a91d3fff] usable
BIOS-e820: [mem 0x00000000a91d4000-0x00000000a9561fff] reserved
BIOS-e820: [mem 0x00000000a9562000-0x00000000a96f4fff] usable
BIOS-e820: [mem 0x00000000a96f5000-0x00000000a9da3fff] ACPI NVS
BIOS-e820: [mem 0x00000000a9da4000-0x00000000aa4a2fff] reserved
BIOS-e820: [mem 0x00000000aa4a3000-0x00000000aa4fefff] type 20
BIOS-e820: [mem 0x00000000aa4ff000-0x00000000aa4fffff] usable
BIOS-e820: [mem 0x00000000aa500000-0x00000000afffffff] reserved
BIOS-e820: [mem 0x00000000f0000000-0x00000000f7ffffff] reserved
BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000084effffff] usable
NX (Execute Disable) protection: active
efi: EFI v2.50 by American Megatrends
efi: ACPI 2.0=0xa99f5000 ACPI=0xa99f5000 SMBIOS=0xaa3ce000 SMBIOS 3.0=0xaa3cd000 MPS=0xfca00 ESRT=0xa7cb7c58
random: fast init done
SMBIOS 3.0.0 present.
DMI: Gigabyte Technology Co., Ltd. Z170X-Ultra Gaming/Z170X-Ultra Gaming-CF, BIOS F23g 12/01/2017
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x84f000 max_arch_pfn = 0x400000000
MTRR default type: write-back
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 00C0000000 mask 7FC0000000 uncachable
1 base 00B0000000 mask 7FF0000000 uncachable
2 base 00AC000000 mask 7FFC000000 uncachable
3 base 00AB800000 mask 7FFF800000 uncachable
4 disabled
5 disabled
6 disabled
7 disabled
8 disabled
9 disabled
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
e820: last_pfn = 0xaa500 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fccc0-0x000fcccf] mapped at [ffffffffff240cc0]
esrt: Reserving ESRT space from 0x00000000a7cb7c58 to 0x00000000a7cb7c90.
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff8f59c0089000] 89000 size 24576
Using GB pages for direct mapping
BRK [0x34f635000, 0x34f635fff] PGTABLE
BRK [0x34f636000, 0x34f636fff] PGTABLE
BRK [0x34f637000, 0x34f637fff] PGTABLE
BRK [0x34f638000, 0x34f638fff] PGTABLE
BRK [0x34f639000, 0x34f639fff] PGTABLE
BRK [0x34f63a000, 0x34f63afff] PGTABLE
BRK [0x34f63b000, 0x34f63bfff] PGTABLE
BRK [0x34f63c000, 0x34f63cfff] PGTABLE
BRK [0x34f63d000, 0x34f63dfff] PGTABLE
BRK [0x34f63e000, 0x34f63efff] PGTABLE
BRK [0x34f63f000, 0x34f63ffff] PGTABLE
Secure boot could not be determined
RAMDISK: [mem 0x36fdf000-0x377e6fff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000A99F5000 000024 (v02 ALASKA)
ACPI: XSDT 0x00000000A99F50A8 0000CC (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FACP 0x00000000A9A1D490 000114 (v06 ALASKA A M I 01072009 AMI 00010013)
ACPI: DSDT 0x00000000A99F5208 028285 (v02 ALASKA A M I 01072009 INTL 20160422)
ACPI: FACS 0x00000000A9DA3C40 000040
ACPI: APIC 0x00000000A9A1D5A8 000084 (v03 ALASKA A M I 01072009 AMI 00010013)
ACPI: FPDT 0x00000000A9A1D630 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: MCFG 0x00000000A9A1D678 00003C (v01 ALASKA A M I 01072009 MSFT 00000097)
ACPI: FIDT 0x00000000A9A1D6B8 00009C (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: SSDT 0x00000000A9A1D758 003154 (v02 SaSsdt SaSsdt 00003000 INTL 20160422)
ACPI: SSDT 0x00000000A9A208B0 002544 (v02 PegSsd PegSsdt 00001000 INTL 20160422)
ACPI: HPET 0x00000000A9A22DF8 000038 (v01 INTEL SKL 00000001 MSFT 0000005F)
ACPI: SSDT 0x00000000A9A22E30 000E3B (v02 INTEL Ther_Rvp 00001000 INTL 20160422)
ACPI: SSDT 0x00000000A9A23C70 002AD7 (v02 INTEL xh_rvp10 00000000 INTL 20160422)
ACPI: UEFI 0x00000000A9A26748 000042 (v01 INTEL EDK2 00000002 01000013)
ACPI: SSDT 0x00000000A9A26790 000EDE (v02 CpuRef CpuSsdt 00003000 INTL 20160422)
ACPI: LPIT 0x00000000A9A27670 000094 (v01 INTEL SKL 00000000 MSFT 0000005F)
ACPI: WSMT 0x00000000A9A27708 000028 (v01 INTEL SKL 00000000 MSFT 0000005F)
ACPI: SSDT 0x00000000A9A27730 00029F (v02 INTEL sensrhub 00000000 INTL 20160422)
ACPI: SSDT 0x00000000A9A279D0 003002 (v02 INTEL PtidDevc 00001000 INTL 20160422)
ACPI: DBGP 0x00000000A9A2A9D8 000034 (v01 INTEL 00000002 MSFT 0000005F)
ACPI: DBG2 0x00000000A9A2AA10 000054 (v00 INTEL 00000002 MSFT 0000005F)
ACPI: BGRT 0x00000000A9A2AA68 000038 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: DMAR 0x00000000A9A2AAA0 0000A8 (v01 INTEL SKL 00000001 INTL 00000001)
ACPI: BGRT 0x00000000A9A2AB48 000038 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000084effffff]
NODE_DATA(0) allocated [mem 0x84effc000-0x84effffff]
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x000000084effffff]
Device empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x0000000000057fff]
node 0: [mem 0x0000000000059000-0x000000000009efff]
node 0: [mem 0x0000000000100000-0x000000009fc67fff]
node 0: [mem 0x000000009fc6a000-0x00000000a91d3fff]
node 0: [mem 0x00000000a9562000-0x00000000a96f4fff]
node 0: [mem 0x00000000aa4ff000-0x00000000aa4fffff]
node 0: [mem 0x0000000100000000-0x000000084effffff]
Initmem setup node 0 [mem 0x0000000000001000-0x000000084effffff]
On node 0 totalpages: 8356611
DMA zone: 64 pages used for memmap
DMA zone: 55 pages reserved
DMA zone: 3997 pages, LIFO batch:0
DMA32 zone: 10766 pages used for memmap
DMA32 zone: 688998 pages, LIFO batch:31
Normal zone: 119744 pages used for memmap
Normal zone: 7663616 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x1808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
smpboot: Allowing 4 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x00058000-0x00058fff]
PM: Registered nosave memory: [mem 0x0009f000-0x000fffff]
PM: Registered nosave memory: [mem 0x9fc68000-0x9fc68fff]
PM: Registered nosave memory: [mem 0x9fc69000-0x9fc69fff]
PM: Registered nosave memory: [mem 0xa91d4000-0xa9561fff]
PM: Registered nosave memory: [mem 0xa96f5000-0xa9da3fff]
PM: Registered nosave memory: [mem 0xa9da4000-0xaa4a2fff]
PM: Registered nosave memory: [mem 0xaa4a3000-0xaa4fefff]
PM: Registered nosave memory: [mem 0xaa500000-0xafffffff]
PM: Registered nosave memory: [mem 0xb0000000-0xefffffff]
PM: Registered nosave memory: [mem 0xf0000000-0xf7ffffff]
PM: Registered nosave memory: [mem 0xf8000000-0xfdffffff]
PM: Registered nosave memory: [mem 0xfe000000-0xfe010fff]
PM: Registered nosave memory: [mem 0xfe011000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
PM: Registered nosave memory: [mem 0xfec01000-0xfedfffff]
PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
e820: [mem 0xb0000000-0xefffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:4 nr_node_ids:1
percpu: Embedded 42 pages/cpu @ffff8f620ec00000 s134168 r8192 d29672 u524288
pcpu-alloc: s134168 r8192 d29672 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3
Built 1 zonelists, mobility grouping on. Total pages: 8225982
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 32708772K/33426444K available (10252K kernel code, 1163K rwdata, 2812K rodata, 1352K init, 992K bss, 717672K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Kernel/User page tables isolation: enabled
ftrace: allocating 29419 entries in 115 pages
Preemptible hierarchical RCU implementation.
RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=4.
Tasks RCU enabled.
RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
NR_IRQS: 8448, nr_irqs: 1024, preallocated irqs: 16
Console: colour dummy device 80x25
console [tty0] enabled
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns
hpet clockevent registered
tsc: Detected 4000.000 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 8019.00 BogoMIPS (lpj=13360000)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20170728
ACPI: 8 ACPI AML tables successfully acquired and loaded
Security Framework initialized
Yama: becoming mindful.
Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes)
Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Mount-cache hash table entries: 65536 (order: 7, 524288 bytes)
Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes)
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 10 MCE banks
CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 128, 2MB 8, 4MB 8
Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
Spectre V2 mitigation: Vulnerable: Minimal generic ASM retpoline
Freeing SMP alternatives memory: 24K
smpboot: Max logical packages: 1
DMAR: Host address width 39
DMAR: DRHD base: 0x000000fed90000 flags: 0x0
DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 7e3ff0505e
DMAR: DRHD base: 0x000000fed91000 flags: 0x1
DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c40660462 ecap f050da
DMAR: RMRR base: 0x000000a94dc000 end: 0x000000a94fbfff
DMAR: RMRR base: 0x000000ab800000 end: 0x000000afffffff
DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
DMAR-IR: HPET id 0 under DRHD base 0xfed91000
DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
DMAR-IR: Enabled IRQ remapping in x2apic mode
x2apic enabled
Switched APIC routing to cluster x2apic.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
TSC deadline timer enabled
smpboot: CPU0: Intel(R) Core(TM) i7-6700K CPU @ 4.00GHz (family: 0x6, model: 0x5e, stepping: 0x3)
Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver.
... version: 4
... bit width: 48
... generic registers: 8
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 3
... event mask: 00000007000000ff
Hierarchical SRCU implementation.
NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
smp: Bringing up secondary CPUs ...
x86: Booting SMP configuration:
.... node #0, CPUs: #1 #2 #3
smp: Brought up 1 node, 4 CPUs
smpboot: Total of 4 processors activated (32076.00 BogoMIPS)
devtmpfs: initialized
x86/mm: Memory block size: 128MB
PM: Registering ACPI NVS region [mem 0x9fc68000-0x9fc68fff] (4096 bytes)
PM: Registering ACPI NVS region [mem 0xa96f5000-0xa9da3fff] (7008256 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
futex hash table entries: 1024 (order: 4, 65536 bytes)
pinctrl core: initialized pinctrl subsystem
RTC time: 13:19:21, date: 01/20/18
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-7f] at [mem 0xf0000000-0xf7ffffff] (base 0xf0000000)
PCI: MMCONFIG at [mem 0xf0000000-0xf7ffffff] reserved in E820
PCI: Using configuration type 1 for base access
HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Executed 35 blocks of module-level executable AML code
ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
ACPI: \_PR_.CPU0: _OSC native thermal LVT Acked
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: Enabled 6 GPEs in block 00 to 7F
ACPI: Power Resource [PG00] (on)
ACPI: Power Resource [PG01] (on)
ACPI: Power Resource [PG02] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [FN00] (off)
ACPI: Power Resource [FN01] (off)
ACPI: Power Resource [FN02] (off)
ACPI: Power Resource [FN03] (off)
ACPI: Power Resource [FN04] (off)
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-7e])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0xb0000000-0xefffffff window]
pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfe7fffff window]
pci_bus 0000:00: root bus resource [bus 00-7e]
pci 0000:00:00.0: [8086:191f] type 00 class 0x060000
pci 0000:00:01.0: [8086:1901] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.1: [8086:1905] type 01 class 0x060400
pci 0000:00:01.1: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: [8086:1912] type 00 class 0x038000
pci 0000:00:02.0: reg 0x10: [mem 0xed000000-0xedffffff 64bit]
pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f]
pci 0000:00:14.0: [8086:a12f] type 00 class 0x0c0330
pci 0000:00:14.0: reg 0x10: [mem 0xef230000-0xef23ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:16.0: [8086:a13a] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xef24d000-0xef24dfff 64bit]
pci 0000:00:16.0: PME# supported from D3hot
pci 0000:00:17.0: [8086:2822] type 00 class 0x010400
pci 0000:00:17.0: reg 0x10: [mem 0xef248000-0xef249fff]
pci 0000:00:17.0: reg 0x14: [mem 0xef24c000-0xef24c0ff]
pci 0000:00:17.0: reg 0x18: [io 0xf090-0xf097]
pci 0000:00:17.0: reg 0x1c: [io 0xf080-0xf083]
pci 0000:00:17.0: reg 0x20: [io 0xf060-0xf07f]
pci 0000:00:17.0: reg 0x24: [mem 0xef24b000-0xef24b7ff]
pci 0000:00:17.0: PME# supported from D3hot
pci 0000:00:1b.0: [8086:a167] type 01 class 0x060400
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.2: [8086:a169] type 01 class 0x060400
pci 0000:00:1b.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: [8086:a110] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: [8086:a111] type 01 class 0x060400
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: [8086:a112] type 01 class 0x060400
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: [8086:a114] type 01 class 0x060400
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: [8086:a118] type 01 class 0x060400
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.4: [8086:a11c] type 01 class 0x060400
pci 0000:00:1d.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1f.0: [8086:a145] type 00 class 0x060100
pci 0000:00:1f.2: [8086:a121] type 00 class 0x058000
pci 0000:00:1f.2: reg 0x10: [mem 0xef244000-0xef247fff]
pci 0000:00:1f.3: [8086:a170] type 00 class 0x040300
pci 0000:00:1f.3: reg 0x10: [mem 0xef240000-0xef243fff 64bit]
pci 0000:00:1f.3: reg 0x20: [mem 0xef220000-0xef22ffff 64bit]
pci 0000:00:1f.3: PME# supported from D3hot D3cold
pci 0000:00:1f.4: [8086:a123] type 00 class 0x0c0500
pci 0000:00:1f.4: reg 0x10: [mem 0xef24a000-0xef24a0ff 64bit]
pci 0000:00:1f.4: reg 0x20: [io 0xf040-0xf05f]
pci 0000:00:1f.6: [8086:15b8] type 00 class 0x020000
pci 0000:00:1f.6: reg 0x10: [mem 0xef200000-0xef21ffff]
pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold
pci 0000:01:00.0: [10de:1b81] type 00 class 0x030000
pci 0000:01:00.0: reg 0x10: [mem 0xee000000-0xeeffffff]
pci 0000:01:00.0: reg 0x14: [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:01:00.0: reg 0x1c: [mem 0xe0000000-0xe1ffffff 64bit pref]
pci 0000:01:00.0: reg 0x24: [io 0xe000-0xe07f]
pci 0000:01:00.0: reg 0x30: [mem 0xef000000-0xef07ffff pref]
pci 0000:01:00.0: BAR 3: assigned to efifb
pci 0000:01:00.1: [10de:10f0] type 00 class 0x040300
pci 0000:01:00.1: reg 0x10: [mem 0xef080000-0xef083fff]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
pci 0000:00:01.0: bridge window [mem 0xee000000-0xef0fffff]
pci 0000:00:01.0: bridge window [mem 0xd0000000-0xe1ffffff 64bit pref]
pci 0000:02:00.0: [1b85:1041] type 00 class 0x010000
pci 0000:02:00.0: reg 0x10: [mem 0xef140000-0xef15ffff 64bit]
pci 0000:02:00.0: reg 0x18: [mem 0xef100000-0xef13ffff 64bit]
pci 0000:02:00.0: reg 0x30: [mem 0xef160000-0xef16ffff pref]
pci 0000:02:00.0: supports D1
pci 0000:02:00.0: PME# supported from D0 D1 D3hot
pci 0000:00:01.1: PCI bridge to [bus 02]
pci 0000:00:01.1: bridge window [mem 0xef100000-0xef1fffff]
pci 0000:00:1b.0: PCI bridge to [bus 03]
pci 0000:00:1b.2: PCI bridge to [bus 04]
pci 0000:00:1c.0: PCI bridge to [bus 05]
pci 0000:00:1c.1: PCI bridge to [bus 06]
pci 0000:00:1c.2: PCI bridge to [bus 07]
pci 0000:00:1c.4: PCI bridge to [bus 08]
pci 0000:00:1d.0: PCI bridge to [bus 09]
pci 0000:00:1d.4: PCI bridge to [bus 0a]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
pci 0000:01:00.0: vgaarb: setting as boot VGA device
pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
pci 0000:01:00.0: vgaarb: bridge control possible
vgaarb: loaded
EDAC MC: Ver: 3.0.0
Registered efivars operations
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
e820: reserve RAM buffer [mem 0x9fc68000-0x9fffffff]
e820: reserve RAM buffer [mem 0xa91d4000-0xabffffff]
e820: reserve RAM buffer [mem 0xa96f5000-0xabffffff]
e820: reserve RAM buffer [mem 0xaa500000-0xabffffff]
e820: reserve RAM buffer [mem 0x84f000000-0x84fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 24.000000 MHz counter
clocksource: Switched to clocksource hpet
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
pnp: PnP ACPI init
system 00:00: [io 0x0a00-0x0a2f] has been reserved
system 00:00: [io 0x0a30-0x0a3f] has been reserved
system 00:00: [io 0x0a40-0x0a4f] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:01: [dma 0 disabled]
pnp 00:01: Plug and Play ACPI device, IDs PNP0501 (active)
system 00:02: [io 0x0680-0x069f] has been reserved
system 00:02: [io 0xffff] has been reserved
system 00:02: [io 0xffff] has been reserved
system 00:02: [io 0xffff] has been reserved
system 00:02: [io 0x1800-0x18fe] has been reserved
system 00:02: [io 0x164e-0x164f] has been reserved
system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:03: [io 0x0800-0x087f] has been reserved
system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:05: [io 0x1854-0x1857] has been reserved
system 00:05: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
system 00:06: [mem 0xfed10000-0xfed17fff] has been reserved
system 00:06: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:06: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:06: [mem 0xf0000000-0xf7ffffff] has been reserved
system 00:06: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:06: [mem 0xfed90000-0xfed93fff] could not be reserved
system 00:06: [mem 0xfed45000-0xfed8ffff] has been reserved
system 00:06: [mem 0xff000000-0xffffffff] has been reserved
system 00:06: [mem 0xfee00000-0xfeefffff] could not be reserved
system 00:06: [mem 0xeffe0000-0xefffffff] has been reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:07: [mem 0xfd000000-0xfdabffff] has been reserved
system 00:07: [mem 0xfdad0000-0xfdadffff] has been reserved
system 00:07: [mem 0xfdb00000-0xfdffffff] has been reserved
system 00:07: [mem 0xfe000000-0xfe01ffff] could not be reserved
system 00:07: [mem 0xfe036000-0xfe03bfff] has been reserved
system 00:07: [mem 0xfe03d000-0xfe3fffff] has been reserved
system 00:07: [mem 0xfe410000-0xfe7fffff] has been reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:08: [io 0xff00-0xfffe] has been reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:09: [mem 0xfdaf0000-0xfdafffff] has been reserved
system 00:09: [mem 0xfdae0000-0xfdaeffff] has been reserved
system 00:09: [mem 0xfdac0000-0xfdacffff] has been reserved
system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 10 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
pci 0000:00:01.0: bridge window [mem 0xee000000-0xef0fffff]
pci 0000:00:01.0: bridge window [mem 0xd0000000-0xe1ffffff 64bit pref]
pci 0000:00:01.1: PCI bridge to [bus 02]
pci 0000:00:01.1: bridge window [mem 0xef100000-0xef1fffff]
pci 0000:00:1b.0: PCI bridge to [bus 03]
pci 0000:00:1b.2: PCI bridge to [bus 04]
pci 0000:00:1c.0: PCI bridge to [bus 05]
pci 0000:00:1c.1: PCI bridge to [bus 06]
pci 0000:00:1c.2: PCI bridge to [bus 07]
pci 0000:00:1c.4: PCI bridge to [bus 08]
pci 0000:00:1d.0: PCI bridge to [bus 09]
pci 0000:00:1d.4: PCI bridge to [bus 0a]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0xb0000000-0xefffffff window]
pci_bus 0000:00: resource 8 [mem 0xfd000000-0xfe7fffff window]
pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
pci_bus 0000:01: resource 1 [mem 0xee000000-0xef0fffff]
pci_bus 0000:01: resource 2 [mem 0xd0000000-0xe1ffffff 64bit pref]
pci_bus 0000:02: resource 1 [mem 0xef100000-0xef1fffff]
NET: Registered protocol family 2
TCP established hash table entries: 262144 (order: 9, 2097152 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
UDP hash table entries: 16384 (order: 7, 524288 bytes)
UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes)
NET: Registered protocol family 1
pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
PCI: CLS 64 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 8224K
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xa0b82000-0xa4b82000] (64MB) mapped at [ffff8f5a60b82000-ffff8f5a64b81fff]
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x39c5e21a6f1, max_idle_ns: 440795312983 ns
Scanning for low memory corruption every 60 seconds
Initialise system trusted keyrings
Key type blacklist registered
workingset: timestamp_bits=41 max_order=23 bucket_order=0
zbud: loaded
Key type asymmetric registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered
io scheduler mq-deadline registered
io scheduler kyber registered
io scheduler bfq registered
io scheduler bfq-sq registered (default)
BFQ I/O-scheduler: v8r12 (with cgroups support)
io scheduler bfq-mq registered
BFQ I/O-scheduler: v8r12 (with cgroups support)
efifb: probing for efifb
efifb: framebuffer at 0xe1000000, using 3072k, total 3072k
efifb: mode is 1024x768x32, linelength=4096, pages=1
efifb: scrolling: redraw
efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
Console: switching to colour frame buffer device 128x48
fb0: EFI VGA frame buffer device
intel_idle: MWAIT substates: 0x142120
intel_idle: v0.4.1 model 0x5E
intel_idle: lapic_timer_reliable_states 0xffffffff
00:01: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
rtc_cmos 00:04: RTC can wake from S4
rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:04: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
intel_pstate: Intel P-state driver initializing
intel_pstate: HWP enabled
ledtrig-cpu: registered to indicate activity on CPUs
vlv2_plat_clk vlv2_plat_clk: vlv2_plat_clk initialized
NET: Registered protocol family 10
Segment Routing with IPv6
NET: Registered protocol family 17
RAS: Correctable Errors collector initialized.
microcode: sig=0x506e3, pf=0x2, revision=0xc2
microcode: Microcode Update Driver: v2.2.
sched_clock: Marking stable (501226469, 0)->(502742179, -1515710)
registered taskstats version 1
Loading compiled-in X.509 certificates
zswap: loaded using pool lzo/zbud
Key type big_key registered
Magic number: 2:122:332
tty tty53: hash matches
memory memory182: hash matches
rtc_cmos 00:04: setting system clock to 2018-01-20 13:19:21 UTC (1516454361)
Freeing unused kernel memory: 1352K
Write protecting the kernel read-only data: 16384k
Freeing unused kernel memory: 2016K
Freeing unused kernel memory: 1284K
i8042: PNP: No PS/2 controller found.
SCSI subsystem initialized
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
libata version 3.00 loaded.
ahci 0000:00:17.0: version 3.0
ahci 0000:00:17.0: controller can't do SNTF, turning off CAP_SNTF
mvsas 0000:02:00.0: mvsas: driver version 0.8.16
mvsas 0000:02:00.0: enabling device (0000 -> 0002)
ahci 0000:00:17.0: AHCI 0001.0301 32 slots 6 ports 6 Gbps 0x3f impl RAID mode
ahci 0000:00:17.0: flags: 64bit ncq pm led clo only pio slum part ems deso sadm sds apst
mvsas 0000:02:00.0: mvsas: PCI-E x8, Bandwidth Usage: 5.0 Gbps
scsi host1: ahci
scsi host2: ahci
scsi host3: ahci
scsi host4: ahci
scsi host5: ahci
scsi host6: ahci
ata1: SATA max UDMA/133 abar m2048@0xef24b000 port 0xef24b100 irq 122
ata2: SATA max UDMA/133 abar m2048@0xef24b000 port 0xef24b180 irq 122
ata3: SATA max UDMA/133 abar m2048@0xef24b000 port 0xef24b200 irq 122
ata4: SATA max UDMA/133 abar m2048@0xef24b000 port 0xef24b280 irq 122
ata5: SATA max UDMA/133 abar m2048@0xef24b000 port 0xef24b300 irq 122
ata6: SATA max UDMA/133 abar m2048@0xef24b000 port 0xef24b380 irq 122
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00109810
xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 16 ports detected
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 10 ports detected
i8042: PNP: No PS/2 controller found.
ata1: SATA link down (SStatus 0 SControl 300)
ata3: SATA link down (SStatus 0 SControl 300)
ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata4.00: ATA-8: KINGSTON SVP100S296G, CJR10202, max UDMA/100
ata4.00: 187557552 sectors, multi 16: LBA48
ata4.00: configured for UDMA/100
ata5: SATA link down (SStatus 0 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
ata2.00: ATA-9: INTEL SSDSC2CT180A4, 335u, max UDMA/133
ata2.00: 351651888 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
usb 1-4: new high-speed USB device number 2 using xhci_hcd
ata2.00: configured for UDMA/133
scsi 2:0:0:0: Direct-Access ATA INTEL SSDSC2CT18 335u PQ: 0 ANSI: 5
scsi 4:0:0:0: Direct-Access ATA KINGSTON SVP100S 0202 PQ: 0 ANSI: 5
sd 4:0:0:0: [sdb] 187557552 512-byte logical blocks: (96.0 GB/89.4 GiB)
sd 4:0:0:0: [sdb] Write Protect is off
sd 4:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] 351651888 512-byte logical blocks: (180 GB/168 GiB)
sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3 sda4
sd 2:0:0:0: [sda] Attached SCSI disk
sdb: sdb1 sdb2 sdb4 sdb5
sd 4:0:0:0: [sdb] Attached SCSI disk
hub 1-4:1.0: USB hub found
hub 1-4:1.0: 4 ports detected
usb 2-3: new SuperSpeed USB device number 2 using xhci_hcd
usbcore: registered new interface driver usb-storage
scsi host7: uas
usbcore: registered new interface driver uas
scsi 7:0:0:0: Direct-Access Seagate Expansion 9300 PQ: 0 ANSI: 6
sd 7:0:0:0: [sdc] 3907029167 512-byte logical blocks: (2.00 TB/1.82 TiB)
sd 7:0:0:0: [sdc] 4096-byte physical blocks
sd 7:0:0:0: [sdc] Write Protect is off
sd 7:0:0:0: [sdc] Mode Sense: 4f 00 00 00
sd 7:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdc: sdc1
sd 7:0:0:0: [sdc] Attached SCSI disk
usb 1-13: new high-speed USB device number 3 using xhci_hcd
clocksource: Switched to clocksource tsc
usb 1-13: unable to read config index 0 descriptor/all
usb 1-13: can't read configurations, error -75
usb 2-4: new SuperSpeed USB device number 3 using xhci_hcd
hub 2-4:1.0: USB hub found
hub 2-4:1.0: 4 ports detected
usb 1-4.2: new low-speed USB device number 4 using xhci_hcd
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: USB USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4.2/1-4.2:1.0/0003:1A2C:0C21.0001/input/input0
hid-generic 0003:1A2C:0C21.0001: input,hidraw0: USB HID v1.10 Keyboard [USB USB Keyboard] on usb-0000:00:14.0-4.2/input0
input: USB USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4.2/1-4.2:1.1/0003:1A2C:0C21.0002/input/input1
usb 1-13: new high-speed USB device number 5 using xhci_hcd
hid-generic 0003:1A2C:0C21.0002: input,hidraw1: USB HID v1.10 Mouse [USB USB Keyboard] on usb-0000:00:14.0-4.2/input1
usb 1-13: unable to read config index 0 descriptor/all
usb 1-13: can't read configurations, error -75
usb usb1-port13: attempt power cycle
usb 2-5: new SuperSpeed USB device number 4 using xhci_hcd
usb-storage 2-5:1.0: USB Mass Storage device detected
scsi host8: usb-storage 2-5:1.0
usb 1-4.3: new high-speed USB device number 6 using xhci_hcd
usb-storage 1-4.3:1.0: USB Mass Storage device detected
scsi host9: usb-storage 1-4.3:1.0
usb 1-13: new high-speed USB device number 7 using xhci_hcd
usb 1-13: unable to read config index 0 descriptor/all
usb 1-13: can't read configurations, error -75
usb 1-4.4: new full-speed USB device number 8 using xhci_hcd
hid-generic 0003:1038:137C.0003: hiddev0,hidraw2: USB HID v1.11 Device [SteelSeries Sensei Wireless Gaming Mouse] on usb-0000:00:14.0-4.4/input0
input: SteelSeries Sensei Wireless Gaming Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4.4/1-4.4:1.1/0003:1038:137C.0004/input/input2
hid-generic 0003:1038:137C.0004: input,hidraw3: USB HID v1.11 Mouse [SteelSeries Sensei Wireless Gaming Mouse] on usb-0000:00:14.0-4.4/input1
input: SteelSeries Sensei Wireless Gaming Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4.4/1-4.4:1.2/0003:1038:137C.0005/input/input3
hid-generic 0003:1038:137C.0005: input,hidraw4: USB HID v1.11 Keyboard [SteelSeries Sensei Wireless Gaming Mouse] on usb-0000:00:14.0-4.4/input2
input: SteelSeries Sensei Wireless Gaming Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4.4/1-4.4:1.3/0003:1038:137C.0006/input/input4
hid-generic 0003:1038:137C.0006: input,hidraw5: USB HID v1.11 Device [SteelSeries Sensei Wireless Gaming Mouse] on usb-0000:00:14.0-4.4/input3
usb 1-13: new high-speed USB device number 9 using xhci_hcd
usb 1-13: unable to read config index 0 descriptor/all
usb 1-13: can't read configurations, error -75
usb usb1-port13: unable to enumerate USB device
usb 1-14: new high-speed USB device number 10 using xhci_hcd
scsi 8:0:0:0: Direct-Access WD My Book 1230 1065 PQ: 0 ANSI: 6
scsi 8:0:0:1: Enclosure WD SES Device 1065 PQ: 0 ANSI: 6
sd 8:0:0:0: [sdd] 1465122304 4096-byte logical blocks: (6.00 TB/5.46 TiB)
sd 8:0:0:0: [sdd] Write Protect is off
sd 8:0:0:0: [sdd] Mode Sense: 53 00 10 08
sd 8:0:0:0: [sdd] No Caching mode page found
sd 8:0:0:0: [sdd] Assuming drive cache: write through
scsi 8:0:0:1: Failed to get diagnostic page 0x1
scsi 8:0:0:1: Failed to bind enclosure -19
ses 8:0:0:1: Attached Enclosure device
usb-storage 1-14:1.0: USB Mass Storage device detected
scsi host10: usb-storage 1-14:1.0
drivers/scsi/mvsas/mv_94xx.c 885:get all reg link rate is 0x122000
drivers/scsi/mvsas/mv_94xx.c 890:get link rate is 10
drivers/scsi/mvsas/mv_sas.c 1084:phy 0 attach dev info is 20001
drivers/scsi/mvsas/mv_sas.c 1086:phy 0 attach sas addr is 0
scsi 9:0:0:0: Direct-Access Generic Compact Flash 0.00 PQ: 0 ANSI: 2
scsi 9:0:0:1: Direct-Access Generic SM/xD-Picture 0.00 PQ: 0 ANSI: 2
scsi 9:0:0:2: Direct-Access Generic SDXC/MMC 0.00 PQ: 0 ANSI: 2
scsi 9:0:0:3: Direct-Access Generic MS/MS-Pro/HG 0.00 PQ: 0 ANSI: 2
scsi 9:0:0:4: Direct-Access Generic SD/MMC/MS/MSPRO 0.00 PQ: 0 ANSI: 2
sd 9:0:0:3: [sdh] Attached SCSI removable disk
sd 9:0:0:2: [sdg] Attached SCSI removable disk
sd 9:0:0:0: [sde] Attached SCSI removable disk
sd 9:0:0:1: [sdf] Attached SCSI removable disk
sd 9:0:0:4: [sdi] Attached SCSI removable disk
drivers/scsi/mvsas/mv_94xx.c 885:get all reg link rate is 0x122000
drivers/scsi/mvsas/mv_94xx.c 890:get link rate is 10
sdd: sdd1 sdd2
sd 8:0:0:0: [sdd] Attached SCSI disk
drivers/scsi/mvsas/mv_sas.c 1084:phy 1 attach dev info is 20001
drivers/scsi/mvsas/mv_sas.c 1086:phy 1 attach sas addr is 1
drivers/scsi/mvsas/mv_sas.c 1084:phy 2 attach dev info is 0
drivers/scsi/mvsas/mv_sas.c 1086:phy 2 attach sas addr is 0
drivers/scsi/mvsas/mv_sas.c 1084:phy 3 attach dev info is 0
drivers/scsi/mvsas/mv_sas.c 1086:phy 3 attach sas addr is 0
scsi 10:0:0:0: Direct-Access USB Mass Storage Device PQ: 0 ANSI: 0 CCS
sd 10:0:0:0: [sdj] Attached SCSI removable disk
drivers/scsi/mvsas/mv_94xx.c 885:get all reg link rate is 0x122000
drivers/scsi/mvsas/mv_94xx.c 890:get link rate is 10
drivers/scsi/mvsas/mv_sas.c 1084:phy 4 attach dev info is 20001
drivers/scsi/mvsas/mv_sas.c 1086:phy 4 attach sas addr is 4
drivers/scsi/mvsas/mv_94xx.c 885:get all reg link rate is 0x122000
drivers/scsi/mvsas/mv_94xx.c 890:get link rate is 10
drivers/scsi/mvsas/mv_sas.c 1084:phy 5 attach dev info is 20001
drivers/scsi/mvsas/mv_sas.c 1086:phy 5 attach sas addr is 5
drivers/scsi/mvsas/mv_sas.c 1084:phy 6 attach dev info is 0
drivers/scsi/mvsas/mv_sas.c 1086:phy 6 attach sas addr is 0
drivers/scsi/mvsas/mv_sas.c 1084:phy 7 attach dev info is 0
drivers/scsi/mvsas/mv_sas.c 1086:phy 7 attach sas addr is 0
scsi host0: mvsas
drivers/scsi/mvsas/mv_sas.c 277:phy 0 byte dmaded.
drivers/scsi/mvsas/mv_sas.c 277:phy 1 byte dmaded.
drivers/scsi/mvsas/mv_sas.c 277:phy 4 byte dmaded.
drivers/scsi/mvsas/mv_sas.c 277:phy 5 byte dmaded.
sas: phy-0:0 added to port-0:0, phy_mask:0x1 ( 0)
sas: phy-0:1 added to port-0:1, phy_mask:0x2 ( 100000000000000)
sas: phy-0:4 added to port-0:2, phy_mask:0x1 ( 400000000000000)
sas: phy-0:5 added to port-0:3, phy_mask:0x2 ( 500000000000000)
sas: DOING DISCOVERY on port 0, pid:166
sas: DONE DISCOVERY on port 0, pid:166, result:0
sas: DOING DISCOVERY on port 1, pid:166
sas: DONE DISCOVERY on port 1, pid:166, result:0
sas: DOING DISCOVERY on port 2, pid:166
sas: DONE DISCOVERY on port 2, pid:166, result:0
sas: DOING DISCOVERY on port 3, pid:166
sas: DONE DISCOVERY on port 3, pid:166, result:0
sas: Enter sas_scsi_recover_host busy: 0 failed: 0
sas: ata7: end_device-0:0: dev error handler
ata7.00: ATA-8: OCZ-REVODRIVE350, 2.50, max UDMA/133
ata7.00: 234441648 sectors, multi 1: LBA48 NCQ (depth 31/32)
ata7.00: configured for UDMA/133
sas: --- Exit sas_scsi_recover_host: busy: 0 failed: 0 tries: 1
scsi 0:0:0:0: Direct-Access ATA OCZ-REVODRIVE350 2.50 PQ: 0 ANSI: 5
sas: Enter sas_scsi_recover_host busy: 0 failed: 0
sas: ata7: end_device-0:0: dev error handler
sas: ata8: end_device-0:1: dev error handler
ata8.00: ATA-8: OCZ-REVODRIVE350, 2.50, max UDMA/133
ata8.00: 234441648 sectors, multi 1: LBA48 NCQ (depth 31/32)
ata8.00: configured for UDMA/133
sas: --- Exit sas_scsi_recover_host: busy: 0 failed: 0 tries: 1
scsi 0:0:1:0: Direct-Access ATA OCZ-REVODRIVE350 2.50 PQ: 0 ANSI: 5
sas: Enter sas_scsi_recover_host busy: 0 failed: 0
sas: ata7: end_device-0:0: dev error handler
sas: ata8: end_device-0:1: dev error handler
sas: ata9: end_device-0:2: dev error handler
ata9.00: ATA-8: OCZ-REVODRIVE350, 2.50, max UDMA/133
ata9.00: 234441648 sectors, multi 1: LBA48 NCQ (depth 31/32)
ata9.00: configured for UDMA/133
sas: --- Exit sas_scsi_recover_host: busy: 0 failed: 0 tries: 1
scsi 0:0:2:0: Direct-Access ATA OCZ-REVODRIVE350 2.50 PQ: 0 ANSI: 5
sas: Enter sas_scsi_recover_host busy: 0 failed: 0
sas: ata7: end_device-0:0: dev error handler
sas: ata8: end_device-0:1: dev error handler
sas: ata9: end_device-0:2: dev error handler
sas: ata10: end_device-0:3: dev error handler
ata10.00: ATA-8: OCZ-REVODRIVE350, 2.50, max UDMA/133
ata10.00: 234441648 sectors, multi 1: LBA48 NCQ (depth 31/32)
ata10.00: configured for UDMA/133
sas: --- Exit sas_scsi_recover_host: busy: 0 failed: 0 tries: 1
scsi 0:0:3:0: Direct-Access ATA OCZ-REVODRIVE350 2.50 PQ: 0 ANSI: 5
sd 0:0:0:0: [sdk] 234441648 512-byte logical blocks: (120 GB/112 GiB)
sd 0:0:0:0: [sdk] Write Protect is off
sd 0:0:0:0: [sdk] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sdk] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:1:0: [sdl] 234441648 512-byte logical blocks: (120 GB/112 GiB)
sd 0:0:1:0: [sdl] Write Protect is off
sd 0:0:1:0: [sdl] Mode Sense: 00 3a 00 00
sd 0:0:1:0: [sdl] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:3:0: [sdn] 234441648 512-byte logical blocks: (120 GB/112 GiB)
sd 0:0:2:0: [sdm] 234441648 512-byte logical blocks: (120 GB/112 GiB)
sd 0:0:3:0: [sdn] Write Protect is off
sd 0:0:3:0: [sdn] Mode Sense: 00 3a 00 00
sd 0:0:2:0: [sdm] Write Protect is off
sd 0:0:2:0: [sdm] Mode Sense: 00 3a 00 00
sd 0:0:2:0: [sdm] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:3:0: [sdn] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:3:0: [sdn] Attached SCSI disk
sd 0:0:1:0: [sdl] Attached SCSI disk
sd 0:0:0:0: [sdk] Attached SCSI disk
sd 0:0:2:0: [sdm] Attached SCSI disk
PM: Starting manual resume from disk
PM: Image not found (code -22)
EXT4-fs (sda1): 13 orphan inodes deleted
EXT4-fs (sda1): recovery complete
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
ip_tables: (C) 2000-2006 Netfilter Core Team
systemd[1]: systemd 236 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN default-hierarchy=hybrid)
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
systemd[1]: Reached target Local Encrypted Volumes.
systemd[1]: Created slice System Slice.
systemd[1]: Listening on Device-mapper event daemon FIFOs.
systemd[1]: Listening on LVM2 poll daemon socket.
EXT4-fs (sda1): re-mounted. Opts: discard
systemd-journald[252]: Received request to flush runtime journal from PID 1
nvidia: loading out-of-tree module taints kernel.
nvidia: module license 'NVIDIA' taints kernel.
Disabling lock debugging due to kernel taint
nvidia-nvlink: Nvlink Core is being initialized, major device number 245
nvidia 0000:01:00.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=io+mem
NVRM: loading NVIDIA UNIX x86_64 Kernel Module 384.111 Tue Dec 19 23:51:45 PST 2017 (using threaded interrupts)
Linux agpgart interface v0.103
random: crng init done
nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms 384.111 Tue Dec 19 22:56:18 PST 2017
input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input5
ACPI: Sleep Button [SLPB]
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input6
ACPI: Power Button [PWRB]
[drm] [nvidia-drm] [GPU ID 0x00000100] Loading driver
[drm] Initialized nvidia-drm 0.0.0 20160202 for 0000:01:00.0 on minor 0
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input7
ACPI: Power Button [PWRF]
media: Linux media interface: v0.10
ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
acpi device:0f: registered as cooling_device4
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input8
i8042: PNP: No PS/2 controller found.
Linux video capture interface: v2.00
i8042: PNP: No PS/2 controller found.
(NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [TZ00] (28 C)
thermal LNXTHERM:01: registered as thermal_zone1
ACPI: Thermal Zone [TZ01] (30 C)
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
Bluetooth: Core ver 2.22
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
ov5693: module is from the staging directory, the quality is unknown, you have been warned.
ov5693: module is from the staging directory, the quality is unknown, you have been warned.
Bluetooth: HCI UART driver ver 2.3
Bluetooth: HCI UART protocol H4 registered
Bluetooth: HCI UART protocol BCSP registered
Bluetooth: HCI UART protocol LL registered
Bluetooth: HCI UART protocol ATH3K registered
Bluetooth: HCI UART protocol Three-wire (H5) registered
Bluetooth: HCI UART protocol Intel registered
Bluetooth: HCI UART protocol Broadcom registered
Bluetooth: HCI UART protocol QCA registered
Bluetooth: HCI UART protocol AG6XX registered
Bluetooth: HCI UART protocol Marvell registered
mousedev: PS/2 mouse device common for all mice
snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002)
snd_hda_intel 0000:01:00.1: Disabling MSI
snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
mei_me 0000:00:16.0: enabling device (0000 -> 0002)
i801_smbus 0000:00:1f.4: enabling device (0001 -> 0003)
i801_smbus 0000:00:1f.4: SPD Write Disable is set
i801_smbus 0000:00:1f.4: SMBus using PCI interrupt
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
e1000e 0000:00:1f.6: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
input: PC Speaker as /devices/platform/pcspkr/input/input9
RAPL PMU: API unit is 2^-32 Joules, 5 fixed counters, 655360 ms ovfl timer
RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
RAPL PMU: hw unit of domain package 2^-14 Joules
RAPL PMU: hw unit of domain dram 2^-14 Joules
RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
RAPL PMU: hw unit of domain psys 2^-14 Joules
e1000e 0000:00:1f.6 0000:00:1f.6 (uninitialized): registered PHC clock
e1000e 0000:00:1f.6 eth0: (PCI Express:2.5GT/s:Width x1) 1c:1b:0d:0c:b4:7c
e1000e 0000:00:1f.6 eth0: Intel(R) PRO/1000 Network Connection
e1000e 0000:00:1f.6 eth0: MAC: 12, PHY: 12, PBA No: FFFFFF-0FF
i915 0000:00:02.0: enabling device (0000 -> 0003)
[drm] Memory usable by graphics device = 4096M
checking generic (e1000000 300000) vs hw (c0000000 10000000)
[drm] Replacing VGA console driver
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
[drm] failed to retrieve link info, disabling eDP
[drm] Initialized i915 1.6.0 20170818 for 0000:00:02.0 on minor 1
snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[drm] Cannot find any crtc or sizes
[drm] Finished loading DMC firmware i915/skl_dmc_ver1_26.bin (v1.26)
snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC892: line_outs=3 (0x14/0x15/0x16/0x0/0x0) type:line
snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
snd_hda_codec_realtek hdaudioC0D0: dig-out=0x11/0x1e
snd_hda_codec_realtek hdaudioC0D0: inputs:
snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19
snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18
snd_hda_codec_realtek hdaudioC0D0: Line=0x1a
input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input10
input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input11
input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1f.3/sound/card0/input12
input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1f.3/sound/card0/input13
input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1f.3/sound/card0/input14
input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1f.3/sound/card0/input15
input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input16
input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input17
input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input18
input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input19
input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input20
input: HDA Intel PCH HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input21
input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input22
input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input23
input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input24
input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input25
[drm] RC6 on
raid6: sse2x1 gen() 14758 MB/s
raid6: sse2x1 xor() 10947 MB/s
raid6: sse2x2 gen() 18580 MB/s
raid6: sse2x2 xor() 12552 MB/s
raid6: sse2x4 gen() 21801 MB/s
raid6: sse2x4 xor() 10308 MB/s
raid6: avx2x1 gen() 29661 MB/s
raid6: avx2x1 xor() 20863 MB/s
raid6: avx2x2 gen() 36704 MB/s
raid6: avx2x2 xor() 23271 MB/s
raid6: avx2x4 gen() 42248 MB/s
raid6: avx2x4 xor() 16113 MB/s
raid6: using algorithm avx2x4 gen() 42248 MB/s
raid6: .... xor() 16113 MB/s, rmw enabled
raid6: using avx2x2 recovery algorithm
xor: automatically using best checksumming function avx
AVX2 version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
Adding 16383996k swap on /dev/sda2. Priority:-2 extents:1 across:16383996k SSDscFS
iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
iTCO_wdt: Found a Intel PCH TCO device (Version=4, TCOBASE=0x0400)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
Btrfs loaded, crc32c=crc32c-intel
BTRFS: device fsid bdf761b2-6273-4930-8591-56846c287bf6 devid 1 transid 2443 /dev/sdd2
BTRFS: device fsid 82ede7ed-eead-467f-9392-85a46eccdbd3 devid 1 transid 14 /dev/sdb5
intel_rapl: Found RAPL domain package
intel_rapl: Found RAPL domain core
intel_rapl: Found RAPL domain uncore
intel_rapl: Found RAPL domain dram
EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: discard
BTRFS info (device sdd2): use zstd compression
BTRFS info (device sdd2): disk space caching is enabled
BTRFS info (device sdd2): has skinny extents
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
NVRM: Your system is not currently configured to drive a VGA console
on the primary VGA device. The NVIDIA Linux graphics driver
requires the use of a text-mode VGA console. Use of other console
drivers including, but not limited to, vesafb, may result in
corruption and stability problems, and is not supported.
nvidia-modeset: Allocated GPU:0 (GPU-62c449be-7c68-24da-8a17-b91d28cd4a1d) @ PCI:0000:01:00.0
systemd-journald[252]: File /var/log/journal/dbbdbc486d5d44d780d462ac5ab1ab25/user-1000.journal corrupted or uncleanly shut down, renaming and replacing.
fuse init (API version 7.26)
e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
BTRFS info (device sdb5): disk space caching is enabled
BTRFS info (device sdb5): has skinny extents
BTRFS info (device sdb5): enabling ssd optimizations
EXT4-fs (sdb2): recovery complete
EXT4-fs (sdb2): mounted filesystem with ordered data mode. Opts: (null)